Disco Duro SATA 3,5" 3TB Seagate ST3000DM007

Drive Specification* ST3000DM007 Formatted capacity (512 bytes/sector)** 3000GB (3TB) Guaranteed sectors 5,860,533,168 Heads 3 Disks 2 Bytes per sector (4K physical emulated at 512-byte sectors) 4096 Default sectors per track 63 Default read/write heads 16 Default cylinders 16,383 Recording density (max) 2294 kB/in Track density (avg) 540 ktracks/in Areal density (avg) 1203 Gb/in2 SATA interface transfer rate 600 MB/s Maximum data transfer rate 185 MB/s ATA data-transfer modes supported PIO modes: 0 to 4 Multiword DMA modes: 0 to 2 Ultra DMA modes 0 to 6 Cache buffer 256MB Height (max) 20.20mm / 0.795 in Width (max) 101.6mm (± 0.25) / 4.0 in (± 0.010) Length (max) 146.99mm / 5.787 in Weight (typical) 490g / 1.08 lb Average latency 6.0 ms Power-on to ready (typ) 10.0s Standby to ready (typ) 10.0s 8.0s Startup current (typical) 12V 2.0A Voltage tolerance (including noise) 5V ±5% 12V ±10% Non-Operating (Ambient °C) 40° to 70° Operating ambient temperature (min °C) 0° Operating temperature (drive case max °C) 60° Temperature gradient 20°C per hour max (operating) 30°C per hour max (non-operating) Relative humidity 5% to 90% (operating) 5% to 95% (non-operating) Relative humidity gradient (max) 30% per hour Wet bulb temperature (max) 30°C max (operating) 40°C max (non-operating) Altitude, operating 304m to 3048m (1000 ft to 10,000 ft) Altitude, non-operating (below mean sea level, max) 304m to12,192m (1000 ft to 40,000+ ft) Operational shock (max) 80 Gs (read) / 70 Gs (write) at 2ms Non-operational shock (max) 300 Gs at 2ms 350 Gs at 2ms Vibration, operating 10Hz to 22Hz: 0.25 Gs, Limited displacement 22Hz to 350Hz: 0.50 Gs 350Hz to 500Hz: 0.25 Gs https://www.seagate.com/www-content/product-content/barracuda-fam/barracuda-new/en-us/docs/100805918g.pdf